【文献评述与RMRE最新论文】脆性断裂、功能梯度材料混合模式断裂和正交各向异性介质伪静态裂纹扩展的自适应分析-CG、CS、EFM

行业资讯 admin 发布时间:2024-09-05 浏览:0 次

关键词:脆性断裂、自适应相场模型、功能梯度材料、正交各向异性材料

CGA finite-volume implementation of the phase-field model for brittle fracture with adaptive mesh refinement

自适应网格细化脆性断裂相场模型的有限体积实现摘要内容相场法(PFM)将裂纹面视为连续函数,这避免了处理奇异问题时的不连续位移场在模拟岩石类材料裂纹扩展方面具有优势。文提出了一种利用有限体积法(FVM)离散线性动量守恒和相场演化控制方程的PFM实现方法,其中耦合方程采用迭代交错格式进行求解,与此同时,为提高计算效率,作者采用了自适应网格细化(AMR)技术。与有限元法(FEM)相比自适应网格细化(AMR)技术在FVM中相对容易实现因为该方法在二维和三维问题中都可以自然地处理带有悬挂节点的非结构化网格。文中对几种经典的裂纹扩展问题包括单边缺口拉伸和剪切试验、L形板试验和带孔缺口板试验进行了模拟并与已有的试验结果和有限元结果进行了对比结果表明基于FVMPFM能够准确有效地模拟裂纹扩展并且比基于FEMPFM更有效。

1 位移为(a) u = 8 × 10-3 mm, (b) u = 10 × 10-3 mm, (c) u = 11.8 × 10-3 mm时单边缺口剪切试验裂纹形态

2 位移为(a) u = 0.25 mm, (b) u = 0.55 mm, (c) u = 1mmL型板试验裂纹形态。实验裂纹剖面图叠加在(c)

3 位移为(a) u = 0.4 mm, (b) u = 1.085 mm, (c) u = 2.145 mm带孔的缺口板的裂纹模式。实验裂纹剖面图叠加在(d)

文献信息

X. L. Yang, N. Guo, Z. X. Yang. A finite-volume implementation of the phase-field model for brittle fracture with adaptive mesh refinement. Computers and Geotechnics, 2024, 165,105921. DOI: 10.1016/j.compgeo.2023.105921. https://www.sciencedirect.com/science/article/pii/S0266352X2300678X

长按识别二维码阅读原文

CSStudy of mixed-mode fracture in functionally graded material using an adaptive phase-field fracture model

基于自适应相场断裂模型的功能梯度材料混合模式断裂研究摘要内容本文系统地研究了功能梯度材料中的复合型断裂扩展问题采用混合模式相场法并结合自适应网格细化技术有效地模拟了裂纹轨迹和载荷-位移响应。文中采用四叉树分解进行网格细化将具有悬挂节点的单元作为n边多边形处理本文研究了单向和双向功能梯度材料中梯度分布、材料级配、裂纹位置、能量释放率和位移配置对裂纹扩展行为的影响,并发现载荷-位移图上的峰值载荷发生了明显的变化尽管临界能量释放率发生了变化但断裂路径保持不变。研究结果表明,在模拟中心断裂板时断裂韧性较低的材料会发生早期失效。这一深入的研究能够加深读者对混合模式裂纹扩展的理解并为改进功能梯度材料的分析和设计方法提供了思路。

1 I型载荷下的均匀单边缺口板。(a) Δu = 0 mm, (b) Δu= 5.41 × 10−3mm, (c) Δu = 5.65 × 10−3 mm自适应网格(d)(e)(f)相应的裂纹路径

2 II型载荷下的均匀单边缺口板。(a) Δu=0 mm, (b) Δu = 1.5 × 10−2mm, (c) Δu = 2 × 10−2mm处的自适应网格 (d)(e)(f)相应的裂纹路径

3(a) ⅰ型加载和 (b) ⅱ型加载作用下均匀单棱缺口板的荷载-位移曲线图

文献信息

A. Shajan, R. Piska, S. Natarajan.Study of mixed-mode fracture in functionally graded material using an adaptive phase-field fracture model.Composite Structures, 2024, 327,117708.

DOI: 10.1016/j.compstruct.2023.117708.

https://www.sciencedirect.com/science/article/pii/S0263822323010541

长按识别二维码阅读原文EFMAdaptive PD-FEM coupling method for modeling pseudo-static crack growth in orthotropic media正交各向异性介质中伪静态裂纹扩展的自适应PD-FEM耦合方法摘要内容本研究发展了基于键的近场动力学公式并将其与有限元方法(FEM)耦合以模拟正交各向异性材料中的裂纹扩展。耦合的PD-FEM公式为同时利用近场动力学和有限元方法的优点提供了条件,该公式利用勒让德函数对材料的方向定义不同的键属性。文中模拟了复合材料中的伪静态裂纹扩展结果表明,文中所提出的方法能够比传统的PD方法更快地预测正交各向异性材料中的裂纹扩展。本文通过与文献中的数值研究结果进行比较证明了文中所提方法的准确性

1(a) 正交各向异性板在拉伸荷载作用下的PD-FEM耦合模型。(b) PD-FEM离散化板(红色和黑色分别代表FEM节点和PD材料点)。使用 (c) 耦合模型和 (d) 基于商用有限元软件的y-位移彩色轮廓

2 采用PD-FEM耦合模型计算了受拉载荷作用下方形板的力-位移

3 紧致张力试验采用正交异性材料,纤维取向为0(a) 自适应耦合方法与BB-PD对应的力-位移图。(b) 自适应耦合模型的有限元节点和单元构型(黑色和红色区域分别代表PD材料点和交点区域)。分别采用(c,e)自适应耦合法和(d,f) BB-PD法进行紧致拉伸试验的裂纹路径轨迹和节点y-位移彩色图

文献信息

R. Alebrahim, S. Marfia. Adaptive PD-FEM coupling method for modeling pseudo-static crack growth in orthotropic media. Engineering Fracture Mechanics, 2023, 294,109710. DOI: 10.1016/j.engfracmech.2023.109710.

https://www.sciencedirect.com/science/article/pii/S0013794423006689

长按识别二维码阅读原文Rock Mechanics and Rock Engineering期刊最新一期论文2023年,第56卷,第10期)

Rockburst and gas outburst forecasting using a probabilistic risk assessment framework in Longwall top coal caving faces

Harshit Agrawal, Sevket Durucan, Wenzhuo Cao, Anna Korre & Ji-Quan Shi

Department of Earth Science and Engineering, Royal School of Mines, Imperial College London, London, SW7 2AZ, UK

https://link.springer.com/article/10.1007/s00603-022-03076-3

Productivity decline mechanisms in gravel packed perforations

Andreas Nicolas Berntsen a, Euripides Papamichos a, Xiyang Xie a, Gang Li b & Ziheng Yao c

aSINTEF Industry, Trondheim, Norway

b Occidental Petroleum Corporation, Houston, USA

c Hess Corporation, New York, USA

https://link.springer.com/article/10.1007/s00603-023-03456-3

Performance evaluation of AE sensors installed like hydrophones in adaptive monitoring networks during a decametre-scale hydraulic Stimulation Experiment

Carolin M. Boese a, Grzegorz Kwiatek a, Katrin Plenkers b, Thomas Fischer b & Georg Dresen a

aHelmholtz Centre Potsdam, GFZ German Research Centre for Geosciences, Section 4.2: Geomechanics and Scientific Drilling, Telegrafenberg, 14473, Potsdam, Germany

bGMuG Gesellschaft für Materialprüfung und Geophysik mbH, Dieselstr. 9, 61231, Bad Nauheim, Germany

https://link.springer.com/article/10.1007/s00603-023-03418-9

Probabilistic evaluation of susceptibility to fluid injection-induced seismicity based on statistics of fracture criticality

Wenzhuo Cao a, Sevket Durucan a, Wu Cai a,b, Ji-Quan Shi a, Anna Korre a, Thomas Ratouis c, Vala Hjörleifsdóttir c & Bergur Sigfússon c

aDepartment of Earth Science and Engineering, Royal School of Mines, Imperial College London, London, UK

bState Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou, 221116, Jiangsu, China

cOrkuveita Reykjavíkur, Bæjarhálsi 1, 110, Reykjavik, Iceland

https://link.springer.com/article/10.1007/s00603-022-03084-3

Injection-induced aseismic slip in tight fractured rocks

Federico Ciardo a & Brice Lecampion b

aSwiss Seismological Service (SED), ETH Zürich, Sonneggstrasse 5, Zürich, 8092, Switzerland

bGeo-energy Laboratory-Gaznat Chair on Geo-energy, EPFL, Rte Cantonale, Lausanne, 1015, Switzerland

https://link.springer.com/article/10.1007/s00603-023-03249-8

Geomechanical and hydrogeological evaluation of a shallow hydraulic fracture at the devine fracture pilot site, Medina County, Texas

Mahdi Haddad, Mohsen Ahmadian, Jun Ge, J.-P. Nicot & William Ambrose

Bureau of Economic Geology, Jackson School of Geosciences, The University of Texas at Austin, Austin, TX, 78713-8924, USA

https://link.springer.com/article/10.1007/s00603-022-03115-z

Microscale THMC modeling of pressure solution in salt rock: Impacts of geometry and temperature

Mengsu Hu, Carl I. Steefel, Jonny Rutqvist & Benjamin Gilbert

Lawrence Berkeley National Laboratory, Berkeley, CA, 94720, USA

https://link.springer.com/article/10.1007/s00603-022-03162-6

Validation and application of a three-dimensional model for simulating proppant transport and fracture conductivity

Jian Huang a, Yue Hao b, Randolph R. Settgast b, Joshua A. White b, Khalid Mateen a & Herve Gross a

a TotalEnergies E&P Research & Technology, Houston, TX, 77002, USA

b Lawrence Livermore National Laboratory, Livermore, CA, 94550, USA

https://link.springer.com/article/10.1007/s00603-022-03092-3

Rapid measurement of biot’s effective stress coefficient for oil well cements with application to well integrity

Meng Meng, Luke P. Frash, J. William Carey, Wenfeng Li & Nathan Welch

Los Alamos National Laboratory, EES-14 Geomechanics, Los Alamos, NM, USA

https://link.springer.com/article/10.1007/s00603-022-02972-y

Quantitative evaluation of the effects of input parameter heterogeneity on model behavior for bonded block models of laboratory rock specimens

Isabella West & Gabriel Walton

Department of Geology and Geological Engineering, Colorado School of Mines, Golden, CO, USA

https://link.springer.com/article/10.1007/s00603-023-03248-9

A simplified approach to estimate anchoring capacity of blocky rock mass with pressure arch theory

Mahdi Shabanimashcool a & Andris Bērziņš b

a Norwegian Geotechnical Institute, Oslo, Norway

b Peikko Group Corporation, Riga, Latvia

https://link.springer.com/article/10.1007/s00603-023-03421-0

Study on the method of pressure relief and energy absorption for protecting roadway under thick and hard roof

Qiang Fu a,b, Jun Yang a,b, Hongxu Song a,b, Xing Wu a,b, Yuxuan Liu a,b & Xingjian Wei a,b

a State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology (Beijing), Beijing, 100083, China

bSchool of Mechanics and Civil Engineering, China University of Mining and Technology (Beijing), Beijing, 100083, China

https://link.springer.com/article/10.1007/s00603-023-03447-4

Ground control method of using roof cutting pressure release and energy-absorbing reinforcement for roadway with extra-thick hard roof

Qi Wang a,b,c, Zhenhua Jiang a,c, Bei Jiang a,b, Manchao He a, Jun Yang a & Haojie Xue a,c

a State Key Laboratory for Geo-Mechanics and Deep Underground Engineering, China University of Mining and Technology-Beijing, Beijing, 100083, China

b State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing, 100081, China

c Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, 250061, China

https://link.springer.com/article/10.1007/s00603-023-03461-6

Research on novel method of gob-side entry retaining under the synergistic effect of roof cutting and roadside filling in thick coal seams

Fuxin Shen a,b, Yanqi Song b, Wenchao Zhao a,b, Shankun Zhao c, Jiangkun Yang a, Yufei Tian c, Junjie Zheng a & Chuanpeng Liu a

a School of Mechanics and Civil Engineering, China University of Mining and Technology(Beijing), Beijing, 100083, China

b State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology(Beijing), Beijing, 100083, China

c Mine Safety Technology Branch, China Coal Research Institute, Beijing, 100013, China

https://link.springer.com/article/10.1007/s00603-023-03385-1

Analysis of causes of vibration differences induced by different kinds of blastholes based on the interpretation of blasting parameters: A case study in dam foundation excavation

Haixiao Zhou a, Qidong Gao a,b, Yong Fan b, Wenbo Lu c, Yaqiong Wang a, Yubo Yang a & Zhendong Leng d

a School of Highway, Chang’an University, Xi’an, 710064, Shaanxi, China

b Hubei Key Laboratory of Construction and Management in Hydropower Engineering, China Three Gorges University, Yichang, 443002, Hubei, China

c State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan, 430072, China

d Gezhouba Group Explosive Co, Ltd, Chongqing, 401121, China

https://link.springer.com/article/10.1007/s00603-023-03457-2

Analysis on rockburst failure energy evolution of model specimen under stress gradient

Gang Wang, Xiqi Liu, Yan Chang, Leibo Song, Changbing Zhou & Zhenhua Wang

a Key Laboratory of Geotechnical and Structural Engineering Safety of Hubei Province, School of Civil Engineering, Wuhan University, Wuhan, 430000, China

b Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology, Wuhan, 430000, China

c Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, Shaoxing University, Shaoxing, 312000, China

d Pearl River Water Resources Research Institute, Guangzhou, 510611, China

e School of Civil and Architecture Engineering, East China University of Technology, Nanchang, 330013, China

https://link.springer.com/article/10.1007/s00603-023-03462-5

Economical recycled concrete aggregates to attenuate successive rockfall impacts: Large-scale field modeling

Yuchen Su a, Heng Zhong a, Yuan Wang b & Yaru Lv a

a College of Mechanics and Materials, Hohai University, Nanjing, 211100, China

b College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, 210098, China

https://link.springer.com/article/10.1007/s00603-023-03423-y

Experimental investigation on permeability and mechanical properties of cement–salt rock interface subjected to cyclic loading

Jing Li a,b, Yuedu Chen a, Weiguo Liang b, Shengli Zhang a & Yuchao Qiu a,b

a Key Laboratory of In-Situ Property Improving Mining of Ministry of Education, Taiyuan University of Technology, Taiyuan, 030024, China

b College of Mining Engineering, Taiyuan University of Technology, Taiyuan, 030024, China

https://link.springer.com/article/10.1007/s00603-023-03434-9

Investigation of cutting rate of diamond wire saw machine using numerical modeling

Ardeshir Amirsharafi, Mehdi Noroozi& Farhang Sereshki

Faculty of Mining, Petroleum and Geophysics Engineering, Shahrood University of Technology, 7-Tir Sq., Shahrood, 3619995161, Iran

https://link.springer.com/article/10.1007/s00603-023-03352-w

A preliminary experimental and numerical study on the applicability of liquid CO2 fracturing in sparse sandstone

Dongdong Ma a,b, Yu Wu a,b, Xiao Ma c, Dawei Hu d,e, Hui Zhou d,e & Decheng Li a,b

a State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, 221116, Jiangsu, China

b School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou, 221116, Jiangsu, China

c State Key Laboratory of Structural Health and Safety of Bridges, Wuhan, 430034, Hubei, China

d State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, Hubei, China

e University of Chinese Academy of Sciences, Beijing, 100049, China

https://link.springer.com/article/10.1007/s00603-023-03427-8

Phase-field simulation of hydraulic fracturing by CO2 and water with consideration of thermoporoelasticity

Yixuan Feng & Abbas Firoozabadi

Department of Chemical and Biomolecular Engineering, Rice University, Houston, TX, USA

https://link.springer.com/article/10.1007/s00603-023-03355-7

Study on tamped spherical detonation-induced dynamic responses of rock and PMMA through mini-chemical explosion tests and a four-dimensional lattice spring model

Jianjun Ma a,b, Jinxin Zhao a,b, Yuexiang Lin c,d, Jiguan Liang c, Junjie Chen a,b, Wanxiang Chen a,b & Linchong Huang a,b,c

a School of Civil Engineering, Sun Yat-Sen University, Guangzhou, 510275, China

b Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), Guangdong Key Laboratory of Oceanic Civil Engineering, Guangdong Research Centre for Underground Space Exploitation Technology, Zhuhai, 519082, China

c School of Aeronautics and Astronautics, Shenzhen Campus of Sun Yat-sen University, Shenzhen, 518107, China

d Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong, China

https://link.springer.com/article/10.1007/s00603-023-03426-9

Experimental study of the rock cutting mechanism with PDC cutter under confining pressure condition

Weiji Liu a,b,c, Hongxing Deng a, Xiaohua Zhu a,b,c, Rui Li a & Chao He d

a School of Mechatronic Engineering, Southwest Petroleum University, Chengdu, 610500, China

b Oil and Gas Equipment Technology Sharing and Service Platform of Sichuan Province, Chengdu, 610500, China

c Geothermal Energy Research Center, Southwest Petroleum University, Chengdu, 610500, China

d CNPC Chuanqing Drilling Engineering Company Limited, Guanghan, 618399, Sichuan, China

https://link.springer.com/article/10.1007/s00603-023-03444-7

The impact of shear rate on the mechanical behavior of rock joints under multiple-influencing factors

Liu He a, Xudong Lu a, Tim Copeland b, Jiannan Chen b, Jiaxin Yan a & Wang Zhao a

a Faculty of Geosciences and Environmental Engineering, Southwest Jiaotong University, No. 999 On Road Xi-an, Xipu Town, Pixian County, Chengdu, 611756, Sichuan, People’s Republic of China

b Department of Civil, Environmental, and Construction Engineering, University of Central Florida, Orlando, FL, USA

https://link.springer.com/article/10.1007/s00603-023-03432-x

A hybrid approach to rock pre-conditioning using non-explosive demolition agents and hydraulic stimulation

V. R. S. De Silva a,b,c, H. Konietzky b, H. Mearten c, P. G. Ranjith d & W. G. P. Kumari e

a Department of Earth Sciences, ETH Zürich, Sonneggstrasse 5, 8092, Zurich, Switzerland

b Institut für Geotechnik, Technische Universität Bergakademie Freiberg, Akademiestraße 6, 09599, Freiberg, Germany

c Umwelt- und Ingenieurtechnik GmbH, Dresden, Germany

d Deep Earth Energy Laboratory, Department of Civil Engineering, Monash University, Building 60, Victoria, 3800, Australia

e School of Civil, Mining, and Environmental Engineering, Faculty of Engineering and Information Sciences, University of Wollongong, Wollongong, Australia

https://link.springer.com/article/10.1007/s00603-023-03455-4

Triaxial Deformation of the Goldwyer Gas Shale at In Situ Stress Conditions—Part II: Viscoelastic Creep/Relaxation and Frictional Failure

Partha Pratim Mandal a,b,c,d, Joel Sarout c,d & Reza Rezaee b

a Indian Institute of Technology (Indian School of Mines), Dhanbad, India

b WASM, Curtin University, Perth, Australia

c CSIRO Energy, Rock Properties Team, Perth, Australia

d CSIRO Energy, Geomechanics and Geophysics Laboratory, Perth, Australia

https://link.springer.com/article/10.1007/s00603-023-03437-6

Laboratory study on injection-induced fault activation and slip behavior on fractures with specified roughness in sandstone

Bolun Zhang a,b, Fujian Yang a,b, Dawei Hu a,b & Hui Zhou a,b

a State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, China

b University of Chinese Academy of Sciences, Beijing, 100049, China

https://link.springer.com/article/10.1007/s00603-023-03439-4

Experimental study of strainbursts caused by stress concentration and local mine stiffness decrease as mining proceeds

Fuqiang Gao a,b, Guiyang Yuan a,b, Wenju Liu a,b & Xiangyuan Peng a,b

a CCTEG Coal Mining Research Institute, Beijing, China

b State Key Laboratory of Coal Mining and Clean Utilization, China Coal Research Institute, Beijing, China

https://link.springer.com/article/10.1007/s00603-023-03445-6

Experimental study on the grouting diffusion process in fractured sandstone with flowing water based on the low-field nuclear magnetic resonance technique

Yang Liu a, Zhijun Wu a,b, Lei Weng a, Longji Wu a, Xiangyu Xu a & Quansheng Liu a,b

a School of Civil Engineering, Wuhan University, No.8 Donghu South Road, Wuhan, 430072, China

b State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan, 430072, China

https://link.springer.com/article/10.1007/s00603-023-03449-2

Fracture toughness anisotropy in shale under deep in situ stress conditions

Q. Zhou a, H. P. Xie a,b, Z. M. Zhu a, R. He a, H. J. Lu a, Z. D. Fan a, X. F. Nie a & L. Ren a

a MOE Key Laboratory of Deep Earth Science and Engineering, College of Architecture and Environment, Sichuan University, Chengdu, 610065, China

b Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Shenzhen University, Shenzhen, 518060, China

https://link.springer.com/article/10.1007/s00603-023-03454-5

Experimental study of true triaxial loading effect on ultrasonic properties of rock salt

Abbas Maadikhah a, Hamed Molladavoodi a, Ali Mortazavi b & Hadi Atapour c

a Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran

b School of Mining and Geosciences, Nazarbayev University, 53 Kabanbay Batyr Ave, Astana, Kazakhstan

c Department of Mining Engineering, Arak University of Technology, Arak, Iran

https://link.springer.com/article/10.1007/s00603-023-03436-7

Thermal impact on the excavation damage zone around a supported drift using the 2nd gradient model

Hangbiao Song, Gilles Corman & Frédéric Collin

Urban and Environmental Engineering Research Unit, Université de Liège, Allée de la Découverte 9, 4000, Liège, Belgium

https://link.springer.com/article/10.1007/s00603-023-03440-x

Thermal effect promotes non-darcian flow in heated rock fractures

Jie Tan a,b, Guan Rong c, Changdong Li a,b, Jia-Qing Zhou a,b & Huiming Tang a,b

a Faculty of Engineering, China University of Geosciences, Wuhan, 430074, China

b Badong National Observation and Research Station of Geohazards, China University of Geosciences, Wuhan, 430074, China

c State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan, 430072, China

https://link.springer.com/article/10.1007/s00603-023-03460-7

The effects of cooling on fine-grained sandstone in relation to wellbore injection of carbon dioxide

Nikolaos Reppas a,b, Colin T. Davie a, Yilin Gui c,d,e, Ben Wetenhall a & Samuel P. Graham a,f

a School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK

b Net-Zero Geosystems Limited, London, SE26 6UT, UK

c School of Civil and Environmental Engineering, Queensland University of Technology, Brisbane, 4000, Australia

dCentre for Materials Science, Queensland University of Technology, Brisbane, 4000, Australia

e Group of Sustainable Engineered Construction Materials, Queensland University of Technology, Brisbane, 4000, Australia

f School of Geosciences, University of Edinburgh, Edinburgh, ED9 4FE, UK

https://link.springer.com/article/10.1007/s00603-023-03446-5

A nonlinear viscoelastic model for wave propagation in porous sandstones under uniaxial loads

Shuang Yang a, Jianhui Deng b, Hua Li b, Fei Chen c, Fei Wang b & Xuankun Li d

a Institute for Disaster Management and Reconstruction, Sichuan University-The Hong Kong Polytechnic University, No. 24 South Section 1, Yihuan Road, Chengdu, 610065, China

b College of Water Resource and Hydropower, Sichuan University, No. 24 South Section 1, Yihuan Road, Chengdu, 610065, China

cCollege of Architecture and Civil Engineering, Chengdu University, Chengdu, 610106, China

dSchool of Mechanical Engineering, Chengdu University, Chengdu, 610106, China

https://link.springer.com/article/10.1007/s00603-023-03459-0

Weakening of compressive strength of granite by piezoelectric actuation of quartz using high-frequency and high-voltage alternating current: A 3D numerical study

Timo Saksala a, Rafael Arturo Rubio Ruiz b, Pascal-Alexandre Kane c & Mikko Hokka b

a Faculty of Built Environment, Tampere University, Tampere, Finland

b Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland

c Sintef Industry, Trondheim, Norway

https://link.springer.com/article/10.1007/s00603-023-03451-8

Mechanical behavior and fracture evolution mechanism of composite rock under triaxial compression: Insights from three-dimensional DEM modeling

Yu Song a, Sheng-Qi Yang a, Ke-Sheng Li a, Peng-Fei Yin a & Peng-Zhi Pan b

a State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou, 221116, People’s Republic of China

b State Key Laboratory of Geomechanics and Geotechnical Engineering, The Chinese Academy of Sciences, Wuhan, 430071, People’s Republic of China

https://link.springer.com/article/10.1007/s00603-023-03443-8

Probability quantification of GSI and D in Hoek–Brown criterion using Bayesian inversion and ultrasonic test in rock mass

Jian Liu a,b,c, Quan Jiang a, Daniel Dias c & Chen Tao d

a State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, China

b University of Chinese Academy of Sciences, Beijing, 100049, China

c Laboratory 3SR, CNRS UMR 5521, Grenoble Alpes University, 38000, Grenoble, France

d Sichuan Huaneng Luding Hydropower Corporation Limited, Chengdu, 610017, China

https://link.springer.com/article/10.1007/s00603-023-03448-3

Preliminary study on the carbide button selection of a button cutter for Beishan granite using indentation tests

Yanan Ma a, Qiuming Gong a, Lijun Yin a, Hongsu Ma b & Le Kang a

a Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology, Beijing, 100124, China

b CNNC Key Laboratory on Geological Disposal of High-level Radioactive Waste, Beijing Research Institute of Uranium Geology, Beijing, 100029, China

https://link.springer.com/article/10.1007/s00603-023-03442-9

An upscaling-based three parameter elastic anisotropy model

E. V. Dontsov

ResFrac Corporation, Palo Alto, CA, United States

https://link.springer.com/article/10.1007/s00603-023-03468-z

本期翻译

刘旭光2021级研究生主编:崔益硕顾问:王永亮

在线咨询

点击这里给我发消息售前咨询专员

点击这里给我发消息售后服务专员

在线咨询

免费通话

24h咨询:400-888-8888


如您有问题,可以咨询我们的24H咨询电话!

免费通话

微信扫一扫

微信联系
返回顶部